Wired surface mounted underwater light (95mm wide) for all hulls typologies.


Wired surface mounted underwater light (95mm wide) for every hull typology.

Embedded Technology

The maximum  expression of technology and innovation in a product that brings marine underwater lights into a new era.
With an all internal driving system, this little but powerful spotlight is surface mountable and is available in dual color white/blue or RGBW full color. 

Amazing luminous intensity

Quasar serie offers a stunning light effect under the water. Thanks to an output of up to 6.000 lumens, Quasar generates a 13m beam with a very high intensity that will let you enjoy the light show around your boat.

Maximum protection

To make the best light is not our only target, we want to make it in the safest way for your boat.

A complex protection system automatically switch off or reduce the light power in case of any failure. In this way we prevent damages to the product in case of exetrnal overvoltages or overtemperatures and we prevent damages to the boat as well in case of any malfunctioning.


Finalist in the prestigious innovative marine equipment awards held in 2021 Amsterdam METSTRADE show. The product has been nominated for the innovative management of energy wireless transfer system and for making a sustainable use of materials not dangerous for environment and for human beings.

NO Galvanic currents

The absence of exposed metal parts eliminates the risk of galvanic currents generation, making Quasar safe for hull integrity over the time.

Anti fogging system

A special gel applied to the lens avoids the fogging on the glass and increases the light brilliance, while the tempered glass gives an high protection against scratches.

60Vdc resistant electronics

The use of automotive certified components allow Quasar to resist to battery voltage peaks. A plus that extends the product life.

The smallest holes in the hull

Quasar lights technology has been specifically designed to safeguard yacht integrity. It can be installed with the screwed frame for an easier maintenance. It is sufficient an as little as 3/8″ (9,5mm) hole to get full advantage of the extraordinary performances of this underwater light.

Best in class Led

Long lasting service and incredible light brilliance.
A battery of OSRAM OSCONIQ leds will release up to 6.000 lumens, making the water around you a real show. Quasar is available in dual color version (Polar White/Sapphire Blue) or RGBW.

12Vdc, 24Vdc, 230Vac

Suitable for 12Vdc and 24Vdc systems (but also for 230Vac one by simply installing an additional power supply unit).

Deep light penetration

Quasar powerful lights can reach the distance of 13 meters in average water quality with an impressive beam intensity and an opening angle of 45 degrees.

Overheating protection

QUASAR is designed to never overheat if used underwater. However it carries on a protection that turns the system off in case of overheating, preventing any damage to the device.

No oxidations

No oxidations on the device thanks to the use of technologically innovative materials that sustitute metal parts. Because details make the difference.

2mm Glass thickness

Light is emitted through a window made of tempered glass 2mm thick, ensuring a very robust solution.

EMC compliant (2014/30/EU)

The device has passed a lot of severe tests, including those related to EMC 2014/30/EU regulation, so to offer you the peace of mind of installing a safe product with no impacts on your on-board systems.

Installation and use video tutorials

Learn how to mechanically install miniWuwled by means of the glued solution (fixing kit KFCA01)

Learn how to mechanically install miniWuwled by means of the brackets solution (fixing kit KFGM01)

Learn how to connect all the wires setting correctly up the electrical system

Learn how to make the system calibration

Learn how to use your miniWuwled

Technical specifications

Product code:


Luminous intensity:

6.000 lm (WHITE)

Double led color:


Power supply:

10 – 30Vdc


2,5A@24Vdc – 5A@12Vdc


up to 60W

White temperature:

6.500K (OSRAM Led)

Driver type:



polarity reverse, overheating, short circuits, electrostatic charges, voltage peaks. Contains automotive qualified electronic components

Resistance to voltage peaks:

60 Vdc (from 32Vdc up to 60Vdc the device automatically shuts down preventing damages)

Lens material:

tempered glass with self- cleaning Nano-technological coating against the formation of algae and the deposit of salt.

External materials:

Tecnological resins



Projector dimensions:

95mm x 115mm x thickness 17,6mm

Transmitter dimensions:

168mm x 168mm x thickness 60mm

Operating modes:

2 external switches (not supplied) per each lights group


  • RoHS: 2011/65/EU
  • Electromagnetic compatibility: 2014/30/EU